Brother HL-L2300D Toner Light Reset
The Brother HL-2300D may report low toner when there is still toner left in the cartridge. This error will not always be resolved by replacing the toner. Complete the following steps to reset the toner counter (and light).
- Press and hold the power button until the machine turns off.
- Open the toner door.
- Press and hold the "Go" button until Step 5.
- Press the power button.
- Release the "Go" button when "Toner", "Paper", and "Drum" light are lit.
- Press the "Go" button 9 times.
- Wait for the "Toner", "Paper", and "Drum" lights to be lit.
- Press the "Go" button 5 times.
- Close the toner door.